Replacement Micron Rated Dust Filter Bags In Pulse Jet And Plenum Pulse Systems
Share provides the three main types of baghouse filter bags and maintains the high standards of quality you expect. Whether you have a pulse-jet, reverse-air or shaker baghouse that needs replacement filters, we can help.
ln Pulse Jet and Plenum Pulse systems, the dust is collected on the outside of the filter bag and the clean air exits through the inside of the bag. The bag is supported by a wire cage to prevent the bag from collapsing during operation.
In a 'Top Load' system, the bags and cages are installed from the clean air side of the cell plate while with 'Bottom Load' they are installed from the dirty air/hopper side of the unit.
Pulse-Type Filter Bags
Sewn-in Circular Disc Base
Sewn-in Circular Disc Base with Bumper Cuff Reinforcement
Snap Band Top to Fit
Flange Top with Wire Ring
Plain Open Top
Open Top with Cuff and Cord
ln Shaker and Reverse-Air cleaning systems, the dust is collected on the inside of the filter bag. Since the bag is inflated with the air/dust stream, support cages are not required. The filtered air exits through the outside surface of the bags. Many configurations are available to suit the needs of most dust collectors.
Shaker-Type Filter Bags
Strap Top
Loop Top
Open Top with Cuff and Cord
Compression Band Top with Cap
Grommet Top
Sewn-In Wire Hanger Top
Snap-band with Grooved Profile to Fit Cell-Plate Hole
Snap-band with Flat Felt to Fit Wheelabrator Style Cell-Plate
Share’s filter bags come in various filter media and finishes. Each fiber type has unique advantages and disadvantages. There are many considerations that go into choosing filter media:
- Process conditions
- Gas temperature
- Dew point
- Dust loading
- Particle size
- Abrasiveness
- Potential for process upset
- Expected life
Product Tags:
|
|
Replacement Micron Rated Dust Filter Bags For Pulse Jet Plenum Systems Images
|
